Customer Servicetel 03
+48 91 414 13 55

Type T507/6

5000 L capacity

single axis with a frame and self-supporting construction


Technical and operational data:

  • length 5080 mm

  • width 2130 mm

  • height 2235 mm

  • with tires 15.0/55 x 17, 500/50 x 17, 400R x 22,5 (depending on version)

  • a number of axis 1

  • wheel track 1650 mm

  • emphasis on the hook 15 kN

  • 5000 liters capacity

  • curb weight 1500 kg

  • total weight 6500 kg

  • spreading reach

  • with a spoon max. 14 m

  • Traktor power 40 kW (53KM)

  • a time to fill tank by the compressor

  • - MEC lub KD 5000 max.4 min

  • MEC lub KD 4000 max.5 min


The slurry tank type T 507 / 6 at capacity 5000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work.

The vehicle is available in four versions:



MINIMUM version has a compressor at capacity 3000 L / min, and a pouring spoon with the splash plate. It has no suction hose 6m.
STANDARD version is the implementation of the standard described below.
CLASSIC version has larger tires in relation to the STANDARD version and an additional latch side to fill the vehicle.
PREMIUM version has larger tires than STANDARD and an additional latch side to fill the tank, oil tank 5 L, a triangular and pto


Specifications and standard equipment:


  1. The tank is made of 5mm thick sheet with additional reinforcements

  2. Construction of the slurry tank:

  • Self-supporting construction of the vehicle - towing bar attached to the reinforced supports in the tank.

  • Frame construction - tank mounted on a frame made from section closed

  1. Tank hot dip galvanized inside and outside.

  2. Painted towing bar or the frame.

  3. Wheelset single axle, two wheels 15.0/55 x 17

  4. Compressor with a capacity of 5000 ltr. / min. (flowability of air)

  5. The double-ball valve protect for overflowing the compressor.

  6. Siphon ø60 the clarifier and drain tap.

  7. Oil catcher / silencer.

  8. Manowakuometr.

  9. Lower hitch latch at height of 400 mm

  10. Exchangeable ear hook (screwed)

  11. Mechanically controlled parking support.

  12. Float level indicator on the front of the tank.

  13. Electrical system 12V connector

  14. The lighting required by the provisions of the Road Traffic.

  15. Service brake - one-way, air.

  16. Handbrake parking.

  17. Hose 4 "(ø 110) of the suction strainer - suction hose length 6 m.

  18. Main drain valve with a diameter of 4 " with the hydraulic control.

  19. The rear hatch with a diameter of 700mm.

  20. Bottling device - spoon shaped pattern poured POMOT 94, filling the width from 12 to 14m.

  21. Painted metallic fenders.

  22. Pressure and underpressure safety valve.

  23. Blanked rear spigots tap 4 ".

  24. Two side connectors on the right and left side, one of them is equipped with an inlet tap 3/ 4 ".

  25. Certificate of approval - for registration and moving on public roads at speeds up to 25km / h

  26. CE Mark


  • This type of car is equipped with a compressor company HERTELL type KD or Battioni & Pagani Pompe type MEC

  • Slurry tanker brands POMOT of 5000 L is a T-series has received 507 SAFETY MARK Agricultural Social Insurance Fund


  • ADDITIONAL EQUIPMENT On request, a vehicle can be adapted to move at a speed of 40km / h


  • The vehicle in version with frame construction can be adapted to mount the applicator soil fertilization with working width from 2.5 m to 4m. (see accessories)

5000 pomot beczkowóz güllefass slurry tanker



5000 pomot beczkowóz güllefass slurry tanker GFK plastic kunstoff1
ico 03Downloads

Specyfikacja - PDF
Ulotka informacyjna - PDF
Copyright 2011 POMOT