Slurry tanks brand POMOT
at capacity 8000 liters
Type T 544 / 3 - as uniaxial
Type T 544 / 2 - as a tandem or two axles sprung version
frame and self-supporting construction

Slurry tank brand POMOT

Type T544/3

8000 L capacity

single axis with a frame and self-supporting construction

Technical and operational data:

• length 6100 mm

• width 2550 mm

• height 2660 mm

• with tires 500/60 x 22,5; 550/60 x 22,5;(depending on version)

• a number of axis 1

• wheel track 1900 mm

• emphasis on the hook 16 kN

• 8000 liters capacity

• curb weight 2400 kg

• total weight 10400 kg

• spreading reach

• with a spoon max. 14 m

• Traktor power 59 kW (80KM)

• a time to fill tank by the compressor

• - MEC lub KD 6500 max.4 min

• MEC lub KD 5000 max.5 min

The slurry tank type T 544 / 3 at capacity 8000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work.

The vehicle is available in four versions:

MINIMUM, STANDARD, CLASSIC and PREMIUM.

MINIMUM version has a compressor at capacity 6500 L / min, and a pouring spoon with the splash plate. It has no suction hose 6m.
STANDARD version is the implementation of the standard described below.
CLASSIC version has larger tires in relation to the STANDARD version and an additional latch side to fill the vehicle.
PREMIUM version has larger tires than STANDARD and an additional latch side to fill the tank, oil tank 5 L, a triangular and pto

Specifications and standard equipment:

1. The tank is made of 5mm thick sheet with additional reinforcements

2. Construction of the slurry tank:

• Self-supporting construction of the vehicle - towing bar attached to the reinforced supports in the tank.

• Frame construction - tank mounted on a frame made from section closed

3. Tank hot dip galvanized inside and outside. Inside the container pier with reinforcing frames.

4. Painted towing bar or the frame.

5. Wheelset single axle, two wheels 500/60 x 22,5

6. Compressor at capacity 8000 ltr. / min. (flowability of air)

7. The double-ball valve protecting for overflowing the compressor.

8. Galvanized t overflow tank with sight glass and drain tap

9. Oil catcher / silencer.

10. Manowakuometr.

11. Lower hitch latch at height of 400 mm

12. Exchangeable ear hook (screwed)

13. Mechanically controlled parking support.

14. Float level indicator on the front of the tank.

15. Electrical system 12V connector

16. The lighting required by the provisions of the Road Traffic.

17. Service brake - one-way, air.

18. Handbrake parking.

19. Hose 4 "(ø 110) of the suction strainer - suction hose length 6 m.

20. Main drain valve with a diameter of 6 " with the hydraulic control.

21. The rear hatch with a diameter of 900mm.

22. Bottling device - spoon shaped pattern poured POMOT 94, filling the width from 12 to 14m.

23. Painted metallic fenders.

24. Pressure and underpressure safety valve.

25. Blanked rear spigots tap 6 ".

26. Two side connectors on the right and left side, one of them is equipped with an inlet tap 3/ 4 ".

27. Certificate of approval - for registration and moving on public roads at speeds up to 25km / h

28. CE Mark

ADDITIONAL EQUIPMENT
 On request, the slurry tank can be adapted to move at a speed of 40km / h
 On request, in the slurry tank can be mounted tires 23.1 x 26 or 700/50 x 26.5
 The slurry tank in the frame structure can be adapted for mounting the applicator soil fertilization with working width from 2.5 m to 4 m and an applicator made in the system naglebowego dragged hoses (see accessories)

WARNING!
The slurry tanker at capacity 8000 L is also available on the TANDEM suspension, as described below: